Welcome to Shop Elect, Biggest Marketplace for Industrial Electrical & Engineering.

FAG Ball monorail guidance systems KUVE45-B-SNL

FAG Ball monorail guidance systems KUVE45-B-SNL

Similar Products

Technical Details

Description

Details

Ball monorail guidance systems KUVE45-B-SNL, narrow, low, long carriage, four-row, full complement ball set; corrosion-resistant design possible
Compressive loadTensile loadMoments about all axesSealed on all sidesGrease lubricationOil lubrication
Ball monorail guidance systems KUVE45-B-SNL, narrow, low, long carriage, four-row, full complement ball set; corrosion-resistant design possible
Ball monorail guidance systems KUVE45-B-SNL, narrow, low, long carriage, four-row, full complement ball set; corrosion-resistant design possible
Lubrication connector on lateral face
Ball monorail guidance systems KUVE45-B-SNL, narrow, low, long carriage, four-row, full complement ball set; corrosion-resistant design possible
Lubrication connector on end face
Ball monorail guidance systems KUVE45-B-SNL, narrow, low, long carriage, four-row, full complement ball set; corrosion-resistant design possible
Lubrication nipple 3)
Ball monorail guidance systems KUVE45-B-SNL, narrow, low, long carriage, four-row, full complement ball set; corrosion-resistant design possible
Lubrication nipple 3)
Ball monorail guidance systems KUVE45-B-SNL, narrow, low, long carriage, four-row, full complement ball set; corrosion-resistant design possible
Load directions
H 52 mm
B 86 mm
L 172,7 mm
1)
Locating face
2)
Marking
3)
Lubrication nipple with tapered head to DIN 71 412-B M6 is supplied loose
A1 20,5 mm
A2 13 mm
A3 8,5 mm
A4 8,5 mm
aL max 94 mm
a L and a R are dependent on the length l max of the guideway
aL min 20 mm
a L and a R are dependent on the length l max of the guideway
aR max 94 mm
a L and a R are dependent on the length l max of the guideway
aR min 20 mm
a L and a R are dependent on the length l max of the guideway
b 45 mm
Tolerance: -0,005 / -0,03
G2 M10
For screws to DIN ISO 4762-12.9

Max. tightening torque in Nm:
M3 = 2,5
M4 = 5
M5 = 10
M6 = 17
M8 = 41
M10 = 83
M12 = 140
M14 = 220
M16 = 340

If there is a possibility of settling, the fixing screws should be secured against rotation
H1 9,7 mm
H5 9,25 mm
h 34,2 mm
h1 16,2 mm
JB 60 mm
JL 80 mm
JL6 35,3 mm
jL 105 mm
Technical Details

Additional Information

Main Group 1 Engineering
Main Group 2 Bearings
Reviews

Quick Enquiry Form

Contact Information

* Required Fields