Welcome to Shop Elect, Biggest Marketplace for Industrial Electrical & Engineering.

FAG Carriages KWSE30-H

FAG Carriages KWSE30-H

Similar Products

Technical Details

Description

Details

Carriages KWSE30-H, high, narrow carriage for six-row linear recirculating ball bearing and guideway assembly
Compressive loadTensile loadMoments about all axesSealed on all sidesGrease lubricationOil lubrication
Carriages KWSE30-H, high, narrow carriage for six-row linear recirculating ball bearing and guideway assembly
Carriages KWSE30-H, high, narrow carriage for six-row linear recirculating ball bearing and guideway assembly
Lubrication connector on end face
Carriages KWSE30-H, high, narrow carriage for six-row linear recirculating ball bearing and guideway assembly
Lubrication connector in top face
Carriages KWSE30-H, high, narrow carriage for six-row linear recirculating ball bearing and guideway assembly
Load directions
H 45 mm
B 60 mm
L 91,4 mm
Minimum covered length for sealing the lubrication connections N2
1)
Locating face
2)
Marking
A1 16 mm
A2 10 mm
A3 9,5 mm
aL max 71 mm
a L and a R are dependent on the length l max of the guideway
aL min 20 mm
a L and a R are dependent on the length l max of the guideway
aR max 71 mm
a L and a R are dependent on the length l max of the guideway
aR min 20 mm
a L and a R are dependent on the length l max of the guideway
b 28 mm
Tolerance: -0,005 / -0,03
G2 M8
For screws to DIN ISO 4762-12.9

Max. tightening torque [MA] in Nm:
M5 = 10
M6 = 17
M8 = 41
M10 = 83
M12 = 140
H1 5,4 mm
H5 6 mm
h 25 mm
h1 13 mm
JB 40 mm
JL 40 mm
JL5 18,5 mm
Position of lubrication hole in adjacent construction.
jL 80 mm
K1 M8
For screws to DIN ISO 4762-12.9

Max. tightening torque [MA] in Nm:
M5 = 10
M6 = 17
M8 = 41
M10 = 83
M12 = 140
M14 = 220
M16 = 340
L1 67 mm
lmax 2000 mm
Maximum length of single-piece guideways; longer guideways are supplied in several sections and are marked accordingly.
Maximum single-piece guideway length of 6 m by agreement.
N2 4,5 mm
Maximum diameter of lubrication hole in adjacent construction
O 4,5x1,5 mm
Technical Details

Additional Information

Main Group 1 Engineering
Main Group 2 Bearings
Reviews

Quick Enquiry Form

Contact Information

* Required Fields