Welcome to Shop Elect, Biggest Marketplace for Industrial Electrical & Engineering.

FAG Carriages KWVE20-B-N

FAG Carriages KWVE20-B-N

Similar Products

Technical Details

Description

Details

Carriages KWVE20-B-N, low carriage, four-row; corrosion-resistant design possible
Compressive loadTensile loadMoments about all axesSealed on all sidesGrease lubricationOil lubrication
Carriages KWVE20-B-N, low carriage, four-row; corrosion-resistant design possible
Carriages KWVE20-B-N, low carriage, four-row; corrosion-resistant design possible
Lubrication connector on lateral face
Carriages KWVE20-B-N, low carriage, four-row; corrosion-resistant design possible
Lubrication connector on end face
Carriages KWVE20-B-N, low carriage, four-row; corrosion-resistant design possible
Lubrication nipple 3)
Carriages KWVE20-B-N, low carriage, four-row; corrosion-resistant design possible
Lubrication nipple 3)
Carriages KWVE20-B-N, low carriage, four-row; corrosion-resistant design possible
Load directions
H 27 mm
B 63 mm
L 71,4 mm
1)
Locating face
2)
Marking
3)
Lubrication nipple with tapered head to DIN 71 412-B M5 is supplied loose
A1 21,5 mm
A2 5 mm
A3 4,7 mm
A4 3,3 mm
aL max 53 mm
a L and a R are dependent on the length l max of the guideway
aL min 20 mm
a L and a R are dependent on the length l max of the guideway
aR max 53 mm
a L and a R are dependent on the length l max of the guideway
aR min 20 mm
a L and a R are dependent on the length l max of the guideway
b 20 mm
Tolerance: -0,005 / -0,03
G2 M6
For screws to DIN ISO 4762-12.9

Max. tightening torque in Nm:
M5 = 5,8
M6 = 10
M8 = 24
M10 = 41
M12 = 83
M14 = 140

If there is a possibility of settling, the fixing screws should be secured against rotation.
H1 4,5 mm
H4 8,6 mm
H5 5,25 mm
h 17 mm
h1 9,1 mm
JB 53 mm
JL 40 mm
JL6 9,4 mm
JLZ 35 mm
Technical Details

Additional Information

Main Group 1 Engineering
Main Group 2 Bearings
Reviews

Quick Enquiry Form

Contact Information

* Required Fields