FAG Linear actuators MKUSE25-ZR-GTRI/8

FAG Linear actuators MKUSE25-ZR-GTRI/8

Sku : MKUSE25-ZR-GTRI/8

Brand : FAG

Price : Price on Request

Similar Products

Technical Details

Description

Details

Linear actuators MKUSE25-ZR-GTRI/8, with integral planetary gearbox; carriage with six rows of balls
Compressive loadTensile loadMoments about all axesGrease lubrication
Linear actuators MKUSE25-ZR-GTRI/8, with integral planetary gearbox; carriage with six rows of balls
Linear actuators MKUSE25-ZR-GTRI/8, with integral planetary gearbox; carriage with six rows of balls
Linear actuators MKUSE25-ZR-GTRI/8, with integral planetary gearbox; carriage with six rows of balls
Linear actuators MKUSE25-ZR-GTRI/8, with integral planetary gearbox; carriage with six rows of balls
Linear actuators MKUSE25-ZR-GTRI/8, with integral planetary gearbox; carriage with six rows of balls
H 125 mm
B 110 mm
L 250 mm
B1 80 mm
Tolerance: +/-0,2
B2 80 mm
B3 112 mm
H1 58 mm
Tolerance: +/-0,5
H2 115,7 mm
H3 25 mm
H4 75 mm
L1 263 mm
L3 117,5 mm
X 163,5 mm
X 206,5 mm
Design with motor holding brake
Y 102,5 mm
mtot (Ltot - 231) x 0,0169 + 18,4 kg
Total mass
mtot (Ltot - 231) x 0,0169 + 19,1 kg
Total mass for motor version with motor holding brake
mLaw 3,8 kg
Mass of carriage
1)
L2 = total stroke + L + 12
Ltot = total stroke + L + 12 + 231
Total stroke = effective stroke + 2 x S (mm)

Attention: The allowance S designates a safety range
and should be at least 85 mm.
Maximum single-piece support rail length L2 = 8000 mm
i 8 mm
Gear reduction ratio
For a planetary gearbox with reduction ratio i = 4:
Maximum drive speed: 4000 min-1
Tightening torque MA of clamping screw = 23,5 Nm
For a planetary gearbox with reduction ratio i = 8:
Maximum drive speed: 4000 min-1
Tightening torque MA of clamping screw = 17,3 Nm
CI 45500 N
Basic load ratings of carriage guidance system
Load direction I: compressive load

Values are valid only for calculating Lh.

The values are single loads and apply when the underside of the actuator is fully supported. They relate to the individual carriages. These must be reduced for combined loads.
C0 I 134000 N
Basic load ratings of carriage guidance system
Load direction I: compressive load

Values are valid only for calculating Lh.

The values are single loads and apply when the underside of the actuator is fully supported. They relate to the individual carriages. These must be reduced for combined loads.
CII 37200 N
Basic load ratings of carriage guidance system
Load direction II: tensile load

Values are valid only for calculating Lh.

The values are single loads and apply when the underside of the actuator is fully supported. They relate to the individual carriages. These must be reduced for combined loads.
C0 II 86000 N
Basic load ratings of carriage guidance system
Load direction II: tensile load

Values are valid only for calculating Lh.

The values are single loads and apply when the underside of the actuator is fully supported. They relate to the individual carriages. These must be reduced for combined loads.
CIII 34600 N
Basic load ratings of carriage guidance system
Load direction III: lateral load

Values are valid only for calculating Lh.

The values are single loads and apply when the underside of the actuator is fully supported. They relate to the individual carriages. These must be reduced for combined loads.
C0 I
Technical Details

Additional Information

Main Group 1 Engineering
Main Group 2 Bearings
Main Group 4 N/A
Width N/A
Bore Diameter N/A
Outside Diameter N/A
Limiting Speed N/A
Reference Speed N/A
Manufacturer FAG
Reviews

Quick Enquiry Form

Contact Information

* Required Fields